RIGOL DSG3000 Series - Manual (Page 53)

RIGOL
DSG3000 Quick Guide 3
4. Function Keys
Set the frequency, frequency offset and phase of the RF
output signal.
Set the amplitude and attenuation of the RF output signal
and provide the flatness calibration function.
Set the sweep type, sweep manner and sweep mode.
Set the parameters relating to amplitude modulation (AM).
Set the parameters relating to frequency modulation (FM)
and phase modulation ( Φ M).
Set the parameters relating to pulse modulation.
Set the parameters relating to I/Q modulation.
Set the parameters relating to LF output, the instrument
options and other extended functions.
Store and recall the instrument state, flatness calibration
data, sweep list and so on.
Set the system-related parameters.