RISCO Group LightSYS Ver 2.xx - Manual (Page 23)

Technical Specifications
Main Technical Information
Input Power: AC/DC Adaptor 100-240V 50/60Hz 14.4V—1.5A or 4A PS
Current Consumption: 60 mA, typical / 70 mA, maximum
Rechargeable Standby Battery: 1.5A PS: 12 Volts up to 7 Amp-Hours (AH), typical
4A PS: 12 Volts up to 17 Amp-Hours (AH), typical
Power Outputs: Auxiliary Power:
1.5A PS: Total current 800mA; Maximum Aux = 500mA;
Maximum BUS (AUX RED) = 800mA
4A PS: Total current 1500mA; Maximum Aux = 500mA;
Maximum BUS (AUX RED) = 1000mA
Bell/LS (External): 12 Volts
DC @ 500 mA, maximum
Programmable outputs: UO1: Dry contact relay (24V, 1 Amps)
UO2-UO4: 100 mA, opto relay
Main Box Dimensions
RP432B Polycarbonate (1.5A PS): 290 x 254 x 97 mm
RP432BM Metal, small (1.5A PS): 264 x 299 x 80 mm
RP432BM1 Metal, large (4A or 1.5A PS): 420 x 379 x 95 mm
Operating temperature
-10°C to 55°C (14°F to 131°F)
Storage temperature
-20°C to 60°C (-4°F to 140°F)
Expanders Technical Information
LCD Keypad (RP432KP) 13.8V +/-10%, 48 mA typical/52 mA max
Proximity LCD Keypad (RP432KPP) 13.8V +/-10%, 62 mA typical/75 mA max
LCD Keypad ( RP128KP) 13.8VDC +/-10%; 100 mA maximum
Proximity Keypad (RP128KPP) 13.8VDC +/-10%; 280 mA maximum
Touchscreen Keypad (RP128KP01) 13.8VDC +/-10%; 30 mA typical / 180 mA max
Touchscreen Keypad with
Proximity (RP128KPP1)
13.8VDC +/-10%; 30 mA typical / 280 mA max
8 zone expansion module 13.8VDC +/-10%; 25 mA, typical / 30 mA, maximum
Bus Zone Expansion 13.8VDC +/-10%; 20 mA, typical
Wireless Expansion module 13.8VDC +/-10%; 65mA maximum
868.6-868.7 MHz (narrowband in EU) or 433.92 MHz
4 relay output expansion module 13.8VDC +/-10%; 25 mA typical / 160 mA maximum
4 Form C (SPDT) Relays.; 5 A / 24V DC
8 transistor output expansion
module
13.8VDC +/-10%; 25 mA typical / 40 mA maximum
Open Collector, Active Pull-Down, 70 mA maximum
Proximity Key Reader 13.8VDC +/-10%; 70 mA, typical / 180 mA max
Digital Voice Module 13.8VDC +/-10%; 30 mA typical / 70 mA maximum
Plug In GSM/GPRS Module: During Communication - 300mA ; During Standby - 30mA
Plug In IP Module: 90
mA
maximum
Plug In Fast PSTN Modem
1
3.8VDC ±10%; 10 mA maximum
3A SMPS
Input: 16.5VAC@ 50VA (via transformer);
Output: Aux: 3A@13VDC; Bell/Siren
1.7A@13 VDC
1.5A Power Supply Expander
Input: 16.5 VAC @ 40 VA (via transformer);
Output: Aux: 400mA@12VDC; Bell/Siren 900mA@12VDC
LightSYS Quick Installer Guide 23