RISCO Group LightSYS Ver 2.xx - Manual (Page 12)

Key  = 4ghiGHI Key  =
0
Key  = 5jklJKL
Key = Move cursor left
Key  = 6mnoMNO
Key = Move cursor right
Key  = 7pqrsPQRS
Key = Save
Programming Menu Concept
The LightSYS programming menu is a dynamic menu that adjusts itself to the system hardwired
devices. For example, in order to see menu option regarding wireless zones or keyfobs, first you
must add a wireless expander to the system.
Access Installer Programming Menu
1. First Time Power Up
1. Disconnect all power from the main panel
2. Set SW1 – 2 (Default) to ON position.
3. Set tamper switches SW1 3,4 to bypass unused tampers according to the relevant
enclosure to prevent tamper alarm
4. Connect – power to the assembled mounted unit. The LightSYS panel – keypad
initialization ensues for a period of minutes.
5. Press the key .
6. Select language. Scroll through the options and press .
Note:
Changing the language can be done also in regular operation mode by pressing +
 simultaneously
7. Enter the Installer code (default:  ) and press .
8. Correct the time and date and confirm by pressing .
9. The system automatically enters the automatic accessories settings process option.
10. Move to the section "Identifying the connected devices" as described below.
2. Enter Installer Programming Mode
1. From the main display press .
2. Enter the Installer code (default:  ) and press .
3. Select [1] Programming and press .
12 LightSYS Quick Installer Guide