RISCO Group LightSYS Ver 2.xx - Manual (Page 19)

• Button 1 options (): None, Arm. Stay, Group, UO
• Button 2 options () : None, Disarm, UO
• Button 3 options: None, Arm. Stay, Group, UO, Panic
• Button 4 options: None, Arm. Stay, Group, UO
Description of 1-Way Keyfob Options
Quick Key Option Description
 None Button disabled
 Arm The button is used for away (full) arming of the assigned
partitions
 Disarm The button is used for disarming its assigned partitions
 Stay The button is used for stay (home) arming of the assigned
partitions

Group
The button is used for Group arming (Partial arming
within a partition / area) of the assigned partitions
 UO The button is used to operate a single utility output
 Panic The button is used to send a panic alarm
Options for the 2-Way Keyfob:
• Serial Num: displays the serial number
• Masking: enables user / keyfob authorization granularity per partition
• Controls : enables panic alarm
• Code: set the PIN Code for high security mode as per system or keyfob flag settings
• UO Key (1/2/3): normally “disabled”
Description of 2-Way Keyfob Options
Quick Key Option Description

Serial No The identifying 11-digit number of the keypad (display only)

Masking: Specifies the partitions that are controlled by the specified keypad.
, 
Controls Panic Enable: Disable/enable the issue panic alarm button
 PIN code

UO Key 1: The button is used to operate a single utility output

UO Key 2: The button is used to operate a single utility output
UO Key 3: The button is used to operate a single utility output
Step3: Setting Slim Keypad Options
From the installer (Programming) menu, select 8) Devices > 1) Keypad > keypad 1, 2,
or 3)
a. Select the user that the slim keypad belongs to, and then press .
b. Use the arrow keys to scroll between menus and the key to select menu
options:
LightSYS Quick Installer Guide 19