RISCO Group LightSYS Ver 2.xx - Manual (Page 22)

[For Configurtion Software connection] To configure the CS settings:
In the Connection Settings node > Cloud area, specify:
1. IP Address: (as per above)
2. Port: (set to 34000)
3. CPID: System panel ID
User Definitions and System Operation
1. Instruct the user to define the actual user codes. Advise the user to change the default Grand
Master code. Help the user enroll proximity tags.
2. Instruct the user on defining and editing the Follow Me destinations.
3. For Cloud mode connections, instruct users with smartphones to download the iRISCO App
from the Apple App store or Android Play Store. Ensure that the connection between the
App and the LightSYS is established.
4. Instruct the user on the following operations, performed from the keypad, keyfobs,
smartphone or Cloud application:
•
Away (Full) Arm

Stay (Home) Arm

Disarm
•
Disarm under duress

Send a panic event

Check the system status
•
Check the system status

Operate a utility output
•
Use the voice menu for remote operation

Use SMS for remote operation
Testing the system
Before leaving the site, it is important to fully test the system. LightSYS has several testing tools that
help you feel confident the system will operate optimally, including relieving any concerns you may
have about the wireless communication.
From the Installer menu, go through the tests under the 2) Testing menu:
•
Main Unit noise level, buzzer, speaker and battery.
•
You can test each device for communication and perform a battery test.
•
For zones you can perform a Walk Test – during which you should receive a “TRIP”
from each detector, (User Menu > Maintenance > Walk test).
•
GSM signal strength.
•
Perform a test to ensure follow me is working (User Menu > Follow Me > Test FM).
The system is now programmed and ready for use.
For more comprehensive and detailed instructions, please refer to the LightSYS 2 Installation and
Programming Manual (5IN2048).
For user functions, please refer to the LightSYS 2 User Manual (5IN2052).
22 LightSYS Quick Installer Guide