MINOURA CS-500 - Manual (Page 2)

Space-Mount SM-2835
instructions manual
Universal & Adjustable Quick-Release
Type Alloy Clamp
MINOURA JAPAN
Made in Japan
1 2
3
4
M5
M5 thread MINOURA JAPAN
1197-1 Godo, Anpachi, Gifu
503-2305 Japan
[email protected]
Prior to clamping, roughly adjust
the jaws opening to the target
diameter by turning the side screw. Wind the supplied plastic sheet
around the tube, close the jaw,
then hook the metal ring.
If you hear clicking sound and you
feel appropriate resistance when
closing the lever, it's OK.
If it's too tight or too loose, the
clamp jaws may be broken or an
serious accident may occur.
Release the clamp and adjust the
opening by turning the side screw,
then try clamping again.
Close the lever.
When closing the lever, if
retracted into the clamp body,
clamping must be loose and
it will cause serious trouble
screw is completely retracted.
49 44924 33225 9