MINOURA True-Base - Manual (Page 3)

(Fig. F)
Normal Position
(metal tip is projected)
Carbon Position
(metal tip is retracted) (Fig. G)
- 3 -
How To Fold Down
True-Base is completely foldable for easier trans-
portation and compact storage.
To fold down, follow the steps;
1. Shut the Side Gauge as narrow as possible by
turning the knob.
2. Loosen the Lock Knob.
3. Close the Pillars (gently push together).
4. Fold the gauges downward and push toward the
Pillars.
5. Flip up the Leg until it touches the Gauge Stay.
6. Tighten the Lock Knob.
!
Be careful not to pinch your fingers
between the body, stay and leg.
(Fig. H)
!
Do not try to store the gauge
between the pillars.
If strong sideward shock is applied,
the plastic gauges should be broken.
To do so, hold the Arm then open it until it is locked
at the widest position. (see Fig. F)
The metal tip of the side gauge can be retracted
by flipping the tip metal piece if you worry about
damage to the side of your rim. (see Fig. G)
However, the contact sound will have to become
smaller so listen more carefully.