MINOURA Tablet Grip TPH-1 User Manual
Page 2
Made in Japan
If you have questions or need help, first contact the
store you purchased the product or the distributor
in your country. If your question remains unanswered, then contact us here;
503-2305
1197-1
Phone: (0584) 27-3131 / Fax: (0584) 27-7505
minoura@minoura,jp
Web: www.minoura.jp
MINOURA JAPAN
(for ALL customers)
1197-1 Godo, Anpachi, Gifu 503-2305 Japan
Phone: +81-584-27-3131 / Fax: +81-584-27-7505
Email: [email protected] / Web: www.minoura.jp
462-0062
Phone: (052) 909-6201 / Fax: (052) 909-6212
Web: www.fukaya-sangyo.co.jp
MINOURA North America
(for U.S. residents ONLY)
Phone: 1-510-538-8599 / Fax: 1-510-538-5899
Email: [email protected]
You need to replace the Arms to the supplied shorter one when using the tablet PC which diagonal size is between 215mm and 280mm.
1
Loosen the backside bolt to remove the Grip Rubber,
then install it to the supplied rail.
It's normal the Grip Rubber swings slightly.
2
Remove the top cover.
3
Remove the rail and remove
the springs.
4
Hook the J-style end
of the spring to the
narrow hole on the Rail.
Put the Rail on the case
as the guide-pins come
through the long hole of the Rail.
Hook the O-style end to the pin.
You may need to pull the Rail slightly
to set it at correct position.