MCZ Club HYDRO 15 kW - Manual (Page 16)

PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL page 16
Installation and assembly Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
2.9. PLUMBING CONNECTION
IMPORTANT!
The connection of the stove to the plumbing
system must be carried out ONLY by specialized
personnel who are capable of carrying out
installation properly, in compliance with current
standards in the country of installation.
It is important that ONLY qualified engineers are
used to fit and commission the appliance in ALL
cases. The installing engineer MUST hold a QCF
recognised biomass qualification. Any company
using sub-contractors MUST ensure they also hold
the relevant qualifications.
If installation of the stove will involve interaction
with another, pre-existing system complete with
heating equipment (gas boiler, methane boiler,
fuel oil boiler, etc.), it is even more advisable to
call in qualified personnel, who subsequently will
be responsible for conformity of the system with
current applicable law.
MCZ will not be held responsible for damage to
persons or things in the event of failed or incorrect
operation if the aforementioned warnings are not
complied with.
For connection of the plumbing system to the stove, the user should
refer to chapter 3, INSTALLATION AND ASSEMBLY; specifically,
paragraph 3.4, CONNECTION TO PLUMBING SYSTEM
ONLY FOR UK