MCZ Club HYDRO 15 kW - Manual (Page 13)

PELLET STOVES Chapter 2
INSTALLATION AND USE MANUAL page 13
Theoretical notions for installation Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
IMPORTANT!
A 90 degree change of direction in the flue pipe must
be fitted with suitable tee connectors to allow the
possibility of inspection. (see accessories for pellet
stove)
It is absolutely prohibited to fit a grille on the end of
the discharge pipe, because it could lead to poor
running of the stove.
FOR CONNECTION TO THE FLUE PIPE, NOT MORE
THAN 150mm OF HORIZONTAL PIPE MUST BE USED
AND NOT MORE THAN 4 x 45° bends MUST BE USED.
I accordance with UK Building Regulations.
ONLY FOR UK