MCZ Club HYDRO 15 kW - Manual (Page 7)

PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL page 7
Operation Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
4.7.
DISPLAY PANEL AND COMMANDS
4.7.1. Control panel logic
Reported below are some useful information to understand the
navigation logic and use the control panel:
 The luminosity of the control panel is switched off after about
30” seconds of the keyboard being inactive. To switch on the
back lighting again just press any of the buttons on the panel.
 The first screen that appears displays the operating status of
the stove (ON, OFF, LIGHTING, SHUTDOWN..) that alternates
with any other settings activated (TIMER, SLEEP, AUTO ECO..)
 By pressing any of the 4 keys around the display (C D E F) you
access the stove's operation settings screen (level of the flame,
fan, set temperature, automatic mode..). From this level the 4
keys around the display assume “dedicated” functions, i.e. they
directly refer to the corresponding words that appear in the 4
corners of the display (e.g.: the word in the top right hand
corner refers to the D key).
 When a setting is modified in any menu level without
confirming the modification using the “OK” key and leaving the
keypad inactive for some seconds, the initial screen reappears
and the modifications are not saved.
 If from any menu level the on/off (B) key is briefly pressed, the
display is automatically taken back to the initial screen (stove
operating status) without saving any modifications not
confirmed with the “OK” key.