MCZ Club HYDRO 15 kW - Manual (Page 30)

PELLET STOVES Chapter 5
INSTALLATION AND USE MANUAL page 30
Maintenance and cleaning Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
 If a failed ignition affects the product repeatedly, despite a
clean brazier and a usual fuel loading, we recommend that you
immediately stop using the stove and contact a qualified
technician to check the stove functionality.
The respect of these suggestions is absolutely enough to guarantee a
safe ignition and to avoid any inconvenient to the product.
If the above precautions are not fulfilled, and the ignition shows an
abnormal amount of pellet in the brazier and a consequent heavy
generation of unburned gas in the combustion chamber, respect
carefully the following suggestions:
 Do not switch off the electrical power from the stove for any
reason: this would arrest the gas exhaust blower with a
consequent spread of smoke into the room.
 Precautionally open the windows to ventilate the installation
room from eventual smoke outlet in ambient (the flue gas
outlet could work not properly).
 Do not open the fire door: this would affect the regular smoke
evacuation from the chimney.
 Simply switch off the stove by pressing the on/off button in the
control panel (not the rear button of power supply!), and wait
till the smoke has been evacuated completely.
 Before any re-lighting attempt, clean completely the brazier and
its air passages from any dirt and unburned pellet; put it in the
proper position removing the dirt eventually present in the base
plate. If a repeated failed ignition happens, stop using the stove
and contact a qualified technician to check the stove and
chimney functionality