MCZ Club HYDRO 15 kW - Manual (Page 19)

PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL page 19
Operation Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
Esc Set
< Date setting >
Esc Off Set
< Chrono >
Esc P00 Ok
< Chrono >
Esc User Ok
< Chrono >
Esc Lu P00 Ok
< Customize >
21.0°C 21.04
OFF
Mode:AUTO Menu
Temp:22°C Fan:A
4.14.2. TIMER activation and selection of a programme.
SETTING OF A WEEKLY PROGRAMME
An explanation will now be provided of how to activate the TIMER
function selecting a daily or weekly programme:
Press the Menu button to scroll through the date and time menu with
the relative key until the word TIMER appears. Then press the SET key
to insert a programme. In the centre of the display between Esc and Ok
the letters P00 appear, by scrolling with the keys below it is possible to
choose between 1 10 weekly preset programmes inside the control
panel of the stove.
According to the tables reported in
paragraph 4.11., choose the
programme that best meets the heating needs of the house and save
the programme number on the display of the control panel. Confirm
with OK.
If none of the 10 pre-set programmes meets your personal heating
needs, you can put together a personalized weekly programme that
suits you best (see next paragraph).
If the keypad of the control panel is inactive for 10
seconds the control panel automatically leaves the
timer adjustment mode and does not confirm the last
setting inserted.
To confirm the TIMER choice press OK.
ATTENTION!
The TIMER function can be activated/deactivated
whether the stove is on or off.
If a timer programme has been activated, in the initial
screen the stove operating status (on/off/start-up….)
alternates with the word “TIMER P01 active”
(example)
SETTING OF A PERSONALIZED PROGRAMME
If one of the pre-set weekly programmes does not suit the heating
needs for your home, you can choose and combine various daily
programmes included in the memory of the control panel to create a
personalized weekly programme.
62 daily programmes can be selected, and you can select a
different programme for each day of the week.
To activate this option, proceed as described above for setting a weekly
programme, but instead of selecting one of the programmes contained
in the table of the weekly programmes (from P01 to P10) select the
programme USER.
Once the USER programme is selected, press SET and in the centre of
the display the word Lu P00 appears (where P00 flashes) while in the
part below, the word CUSTOMIZE appears, by pressing the related key
(bottom right or left) it is possible to insert the daily programme.
By scrolling with the bottom right or left key of the control panel it is
possible to choose the desired programme from 1 to 62, by consulting
the table in par. 4.13.2