MCZ Club HYDRO 15 kW - Manual (Page 14)

PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL page 14
Operation Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
4.11.2.2.
Connecting an external room thermostat (3) or
storage tank (3)
The stove can be connected to an external thermostat “3” or to a
domotic control unit “4”.
To make this conneciton, insert the wires in the board at the back of
the stove in the positions specified in the table.
When managing an external thermostat and a storage tank, the
connection needs to be made to terminal “3”, whereas in the event of a
connection to a domotic control unit, then the connection needs to be
made to terminal “4”. If you wish to connect the modem, then use
terminal “2”
We recommend these connections be made by a specialised
technician.
4 3 2 1
1
COMPUTER CONNECTION (to be made by a specialised technician)
2 MODEM CONNECTION
3 CONNECTION TO AN EXTERNAL ROOM THERMOSTAT CONTROL UNIT
4 CONNECTION TO A DOMOTIC CONTROL UNIT