MCZ Club HYDRO 15 kW - Manual (Page 6)

PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL page 6
Operation Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
4.6. User Training
In ALL cases the installation and commissioning engineer MUST carry
out a thorough handover of the appliance to the homeowner / end user.
The following elements should be covered to the satisfaction of the end
user. Failure to do this may result in unsafe use of the appliance:
 Explanation of the appliance and how it works
 Necessity to maintain ventilation to the appliance and the issues
that may arise otherwise
 Fuel useage and supply
 How to light the appliance safely
 What to do in the event of failed ignitions
 What to do in the event of alarms (in particular those generated
when the appliance runs out of fuel)
 How to maintain the appliance correctly and the importance of
carrying out these tasks each month
 It is good practise to agree a date for the fisrt annual service
 Explain the importance of the CO alarm in accordance with
approved document J of the building regs
 Explain the need for the flue draft stabiliser and its position
within the flue system
 Discuss the use of secondary heating systems if applicable
 Explain how the remote control or room stats operate and their
optimal positioning
 Explain the need for the appliance data plate in accordance with
approved document J of the building regulations
 The commissioning process and paperwork should also be
explained to the homeowner. A copy of the base settings on the
commissioning paperwork should also be left with the
appliance.
ONLY FOR UK
ONLY FOR UK