Choice of display language, Selection of recipe, How to identify the recipe – MCZ Omega '05 User Manual
Page 28

PELLET STOVE
Chapter 4
INSTALLATION AND USE MANUAL
page
27
Operation
Technical Service – Rights reserved MCZ S.p.A. – Reproduction prohibited
EN
G
L
IS
H
. If you press the
MENÙ key again, the message HOUR will appear
and it is possible to set the current time, again using the buttons or
to increase or decrease the displayed value. To confirm the hour
selection, press the button
‘MENÙ
.
There will then be the same
procedure to set the minutes on the next screen display. After confirming
the minutes with the MENÙ
button, setting of the current time is
complete and the display automatically exits setting and goes back to the
initial page.
You can exit time setting also by pressing the button or if you
interrupt the procedure for more than 60 seconds, the display goes back
to the initial page.
EXITING THE MENÙ: to exit any menu screen page,
press key 5 or leave the keyboard inactive for 60
seconds
4.5.2. Choice of display language
The LCD can communicate with the user in the following languages:
Italian, English, German, French and Spanish.
The default language is Italian. If you want to change languages,
you can easily do so as follows:
Press the MENU button , select MENU 3 using buttons or and
press the MENU button again to access language selection mode.
Modify the desired language using buttons or . To confirm the
choice you have made and exit the menu, press the button . The
display will now operate in the desired language.
4.6. SELECTION OF RECIPE
This is an exclusive MCZ evaluation criteria which allows the
user to identify the type of pellet he has at his disposal and
therefore to set the stove up in the most appropriate manner.
This helps to avoid excessive fuel use, ensures the intended
heating potential is achieved and protects the integrity of the
product.
THE CHOICE OF RECIPE IS TO BE MADE AFTER FIRST
INSTALLATION AND EACH TIME YOU CHANGE THE
TYPE OF PELLET.
(E.g. when you change supplier or when you visually detect differences
in colour or piece size)
4.6.1. HOW TO IDENTIFY THE RECIPE:
• Identification of the type of installation or connection to the flue
pipe
• Identification of type of fuel
• Identification of installation (horizontal = o,
vertical = v) see
PelletBox®
First, identify the type of connection to the flue pipe, considering the
following:
LINGUA
ITALIANO
SPRACHE
DEUTSCH
MENU 3
SET
LINGUA