Resetting camera defaults version confirmation, 51 english – Epson PhotoPC L-400 User Manual
Page 51
ADDITIONAL SETTINGS
51
English
RESETTING CAMERA DEFAULTS
How to reset the camera to the original factory default settings.
1.
Use the ud buttons to choose RESET DEFAULT. Press the FLASH
button.
2.
To reset the camera to its original default settings, press the
MACRO button.
To cancel the default resetting, press the FLUSH button.
VERSION CONFIRMATION
How to confirm firmware version of this camera and display compatible
printers.
1.
Use the ud buttons to choose "VERSION". Press the FLASH button.
The firmware version number and compatible printers will appear on
the LCD monitor. To find a suitable printer, confirm the types displayed
on the EPSON Internet Home page.
2.
Press the
MACRO button to return to step
1
.
Turn the DIAL SWITCH to SET UP MODE and then
turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
Turn the DIAL SWITCH to SET UP MODE and then
turn the POWER ON.
The SETUP menu will appear on the LCD monitor.