Epson PhotoPC L-400 - Manual (Page 40)

40 DIRECT PRINTING
PRINTING THE IMAGE SEEN ON THE LCD MONITOR
Only the images visible on the LCD monitor will be printed.
1. Pressing the PRINT button changes the display to DIRECT
PRINTING mode and highlights "Displayed image.".
2. Press the PRINT button again to confirm selection. Use the ud
buttons to select the number of prints.
To change the print setting, press the FLASH button or the MENU
button. (See pages 40, 42-45.)
Press the MACRO button to return to step
1 .
3. Press the PRINT button to begin printing.
Press the MACRO button to cancel printing.
PRINTING SELECTED IMAGES
How to select and print an image.
1. Press the PRINT button to change the display to DIRECT
PRINTING mode.
Press the MACRO button to return to PLAYBACK mode.
2. Using the ud buttons select "Select Images.", then press the PRINT
button.
3. Use the l r buttons to choose the images, then use the ud buttons to
enter the number of copies desired.
Press the MACRO button to return to step
2 .
Press the FLASH button to change the Select Frame. (See pages 40,
42-45.)
To display only a single image, press the T ZOOM button.
4. Press the PRINT button to display the "select images" screen. Press
it again to start printing.
To change the print setting, press the FLASH button or the MENU
button. (See pages 40, 42-45.)
Press the MACRO button to cancel printing while "printing..." is
being displayed.
ALERT
If any DPOF files (See page 46.) exist, a message will appear asking whether you
would like the settings to be used. If you choose not to use the settings, all images
will be set at "0".
PICK IMAGES
Select/cancel the selection of all the image data to print.
3.
Press the MENU button or the FLASH button to change the display
to Print Settings.
Use the l r buttons to choose the Pick Images.
Press the MACRO button to return to step
2 .
4. Using the ud buttons, select "Set all image to one.", "Cancel all
images." or "Designate printing extent.".
Press the FLASH button to select images. Press the MACRO button
to return to step
2 .
Set all image to one.
Adjust the setting to print all the printable picture images recorded in
memory.
Cancel all images.
Set the number of printable images to 0.
Designate printing extent.
Select the first picture image to print with ud l r buttons and press the
FLASH button.
Select the last picture image to print with the next ud l r buttons and
press the FLASH button.
Note:
After "Pick Images", you can select each picture image and set the number to
print for each of them.
Turn the DIAL SWITCH to PLAYBACK MODE and
then turn the POWER ON.
Turn the DIAL SWITCH to PLAYBACK MODE and
then turn the POWER ON.