Epson PhotoPC L-400 - Manual (Page 31)

ADVANCED FUNCTIONS 31
English
ALERT
Remember the parallax problem when you take photos in the MACRO mode using
the VIEWFINDER with the LCD monitor turned off. (See page 16.)
If the flash is used during very close shoots, the picture may come out overexposed.
See page 19 for more detailed information on flash range.
CONTINUOUS SHOOTING
You can record images continuously by holding down the SHUTTER
button.
CONTINUOUS SHOOTING
ALERT
The flash will not work during continuous shooting.
CONTINUOUS IMAGE RECORDING TABLE
ALERT
The total number of shots will vary according to quality, compression, the amount
of memory left on the memory card and the shooting conditions.
Turn the DIAL SWITCH to PHOTO MODE and then
turn the POWER ON.
Even if you have turned off the LCD Monitor with the
DISPLAY button, the
MACRO symbol will still visible.
MACRO button
FOCUS AREA
DISPLAY button
11cm
(4.3 inches)
50cm
(19.6 inches)
1. Press the MENU button and select
CONTINUOUS SHOOTING
with the l r buttons.
2. Select ON with the ud buttons.
3. While the SHUTTER button
remains fully pressed, images
will be recorded continuously.
When the DISPLAY button is
pressed the
CONTINUOUS
symbol replaces the FLASH
symbol.
Quality Approximate Number of Shots
COMPRESSION Normal Fine
RESOLUTION
Standard Approx. 30 Shots Approx. 30 Shots
Fine Approx. 25 Shots Approx. 12 Shots
Super Fine Approx. 12 Shots Approx. 6 Shots
Fine/Super Fine DIGITAL ZOOM(X 3) Approx. 30 Shots Approx. 30 Shots
Fine/Super Fine DIGITAL ZOOM(X 2) Approx. 30 Shots Approx. 20 Shots