Epson 386SX - Manual (Page 64)

Reviewing Your Settings
When you finish using the Setup program to define your
computer’s configuration, press to highlight
Exit
at the
main Setup menu and press Enter. The following Setup
summary appears on the screen:
M e m o r y Extended memory 384 KB
Base memory 6 4 0 K B
Password Power-on password not installed
Network server mode OFF
Display type Monochrome 80 column
Fast boot enabled
If you see an error message on the first Setup summary screen,
see “Adding an Optional Memory Card” later in this chapter.
There are two more Setup summary screens you need to check.
To display the next screen, press
PgDn. You see the following:
Real-time clock Time 13:40:38
Date 12-30-1989
Auto speed disabled
Coprocessor not installed
Diskette drive Drive A: 1.44 MB
Drive B: None
Serial
Parallel
Primary
Primary
2-26 Running the Setup Program