Edirol V-8 - Manual (Page 62)

Switching Images in Synchronization with Music (BPM Sync) (continued)
62
When using BPM Sync to switch images, you can make the transition effect be a cut, or make the transition occur at a
multiple of the displayed BPM interval.
1
Turn the [MEMORY] knob to select the memory number 2–8 that you want to edit.
* Memory number 1 contains the factory preset settings (p. 28). These settings
cannot be modified.
2
Press the [MENU] button to access the menu, and choose “BPM SYNC.”
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select “BPM SYNC.”
Press the [ENTER] button to confirm your selection.
3
Specify the image switching mode.
Use the [ ] [ ] buttons to select “Mode,” and press [ENTER].
Use the [ ] [ ] buttons to specify what will happen when images
are switched.
4
Specify a multiple of the displayed BPM as the switching interval.
Press the [MENU] button to return to the previous screen.
Use the [ ] [ ] buttons to select “Speed,” and press [ENTER].
Use the [ ] [ ] buttons to select the multiple or fraction of the
displayed BPM at which the image will switch.
5
Press the [MENU] button several times to close the menu.
Value Details
DirectA/B Cut between the bus A and bus B images.
TransitionA/B Apply the transition effect selected by the TRANSI-
TION buttons when switching between the bus A and
bus B images.
Value Details
BPMx1/4 Switches the image at 1/4th the speed of the displayed BPM.
BPMx1/2 Switches the image at 1/2 the speed of the displayed BPM.
BPMx1 Switches the image at the same speed as the displayed BPM.
BPMx2 Switches the image at double the speed of the displayed BPM.
Changing the Settings of the [BPM SYNC] Button
V-8_e.book 62 ページ ２０１０年４月１６日 金曜日 午後５時１４分