Edirol V-8 - Manual (Page 59)

59
Editing the Input/Output Settings (continued)
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
e
s
Eff
ects
BPM sync
External de
vices
Video fader
Appendices
The V-8’s input/output format can be switched between the NTSC format used in Japan and the United States, and the PAL
format used in Europe. Choose the setting that’s appropriate for your situation.
1
Press the [MENU] button to access the menu, and choose “Utility.”
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select “Utility.”
Press the [ENTER] button to confirm your selection.
2
Use the [ ] [ ] buttons to select “NTSC/PAL,” and press the [ENTER] button.
3
Use the [ ] [ ] buttons to choose “NTSC” or “PAL.”
The input/output format will change.
4
Press the [MENU] button several times to close the menu.
You can also switch between NTSC and PAL when the V-8 starts up.
1
While holding down the PREVIEW OUT SELECT [1] button and [OUTPUT] button, turn on the
power.
The V-8 will start up with the input/output format switched.
Switching Between NTSC and PAL at Startup
Switching Between NTSC and PAL
When the V-8 starts up, the preview monitor will indicate the input/output format setting (NTSC or
PAL) for several seconds.
The BPM display will also indicate either “ (NTSC)” or “ ” depending on the input/output
setting.
While holding down the buttons
V-8_e.book 59 ページ ２０１０年４月１６日 金曜日 午後５時１４分