Sealey TS401 - Manual (Page 30)

29
convenient.
1) Use the UP/DOWN SCROLL button to select RKE & RF
Monitor from Main Menu (Figure 4.18), and press the Y button
to confirm.
Figure 4.18
2) Hold the key fob very close to the tool and press the function
buttons on key fob to test. If the button works and the key fob is
sending a signal, the tool will beep and the screen will show as
below. If the button does not work, the tool will do nothing. To
make sure each button is working properly, please follow the
process to test each button in turn.
Figure 4.19
 The progress bar indicates the approximate power level of
the key fob.
 The stronger the signal, the higher the beep tone.
 The tool only tests 315MHz and 433MHz key fobs.
3) Press the N button to return to previous menu.