Sealey EU908 - Manual (Page 62)

61
8. Software Update
This function allows you to update the scan tool software
through a computer.
8.1. Register the Tool
User would update the scan tool ONLY after you had registered the
tool on our website: www.maxidas.com.
Then you could download
software, update online, retrieve information and get warranty
service.
NOTE: Prior to registration, please confirm your network is
working properly.
1. Log on the website www.maxidas.com .
2. Click on the Update tool bar at the top of the screen, and then
select User Register. Or,
Click on the Updates column in the lower right corner of the
screen, and select Register.
3. The screen of Register Information appears. Please read through
the instructions, and click on Agree to continue.
4. Put in the Product Serial No. and Register Password, and click
on Next. (Figure 8.1)
5. Follow the instructions on screen to finish the registration.
NOTE: Please use the About function to find out the Product
Serial No. and Register Password. For details, please refer to
the Section 3.6 System Setup.