Sealey EU908 - Manual (Page 35)

with the vehicle. Contact your local distributor or the
manufacturer’s customer service department for assistance.
7） View a summary of system status (MIL status, DTC counts,
Monitor status) on screen. (Figure 6.1 ) Press OK button for
Diagnostic Menu (Figure 6.3) to come up.
System Status
MIL Status OFF
Codes Found 0
Monitors N/A 8
Monitors OK 2
Monitors INC 0
Save OK
Figure 6.1
• If more than one module is detected, you will be prompted to
select a module before testing. (Figure 6.2 )
Control Module
1. Engine
2. Module $A4
Figure 6.2
• Use the UP/DOWN scroll button to select a module and press
the OK button.
6.1. Read Codes
‹ Reading Codes can be done with the key on engine off (KOEO)
or with the key on engine running (KOER).
‹ Stored Codes are also known as “hard codes”, which are fault
34