Sealey EU908 - Manual (Page 39)

3) Press the OK button to confirm.
•
If the codes are cleared successfully, an “Erase Done!”
confirmation message shows on the display.( Figure 6.7)
Erase Codes
Erase Done!
Press any key to continue .
Figure 6.7
•
If the codes are not cleared, then an “Erase Failure. Turn Key
on with Engine off!” message appears. (Figure 6.8)
Erase Codes
Erase Failure.
Turn Key on with
Engine Off!
Press any key to continue
Figure 6.8
4) Press any button to return to Diagnostic Menu.
6.3. Live Data
In this function, you can not only read the live data but also record
data for later review.
38