Sealey TA200 User Manual
Page 2
3.2. Display (Fig 2)
The LCD displays the
measured values obtained in
tests and various other
information regarding the
state/operation of the meter.
The following is an illustration
and descriptive list to enable
the user to understand the
information presented.
Battery is low.
Replace immediately using a PP3 9V
battery. Failure to do so could lead to
inaccurate readings.
Indicates an AC voltage or current.
The displayed value is the mean value
Indicates a negative reading
Diode test
Continuity buzzer is on
Data hold function is active
Indicates the requirement for test leads
to be connected.
Ω
: Ohm. The unit of resistance.
kΩ: kilohm. 1x103 or 1000 ohms.
MΩ: Megaohm. 1x106 or
1,000,000 ohms.
V: Volts. The unit of voltage.
mV: Millivolt. 1x10-3 or 0.001 volts
A: Amperes (amps). The unit of
current.
mA: Milliamp. 1x10-3 or 0.001 amperes
Test of Dwell.
Tach x 10
Number of cylinders
Fig 2
Caution - high voltage testing
Original Language Version
© Jack Sealey Limited
TA200 Issue No: 4(L) - 16/06/14