EnGenius Technologies ECB-1220R - Manual (Page 64)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
64
ƒ Data Rate: Select a data rate from the drop-down list. However, it is recommended to
select auto for the best performance.
ƒ Data Rate: If you would like to force a data rate, you may select one from the drop-
down list. However, for best performance it is recommended to use the Auto setting.
ƒ Preamble Type: For best performance, all devices on the wireless network should
use the same preamble type. However, the wireless network will still function even
though the wrong preamble type is used.
ƒ Transparent Bridge: Can be Enabled/Disabled
ƒ Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.
Security
ƒ Click on the Security link under the Wireless menu. On this page you can configure
the authentication and encryption settings such as WEP, WPA, and 802.1x.
Encryption Disabled
ƒ Encryption: Select None from the drop-down list if your wireless network does not
use any type of encryption.
ƒ Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.