EnGenius Technologies ECB-1220R - Manual (Page 32)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
32
enter a username and password (provided by your ISP) to gain access to the Internet.
The supported authentication protocols are PAP and CHAP.
ƒ Select the Username / Password Connection (PPTP) radio button and then click
on the Next button.
ƒ Address Mode: PPTP can be used with a dynamic or static IP address. If you select
the Dynamic IP radio button, then the IIP address in the next field is not required.
However, if you select the Static IP radio button, then the IP address in the next field
is required.
ƒ PPTP Address: Specify the IP address
ƒ PPTP Subnet Mask: Specify the subnet mask for the IP address.
ƒ PPTP Server IP Address: If the PPTP Server’s IP address is different from the
default gateway, then you may specify it here.
ƒ User Name: Specify the user name which is provided by your ISP.
ƒ Password: Specify the password which is provided by your ISP, and then verify it
once again in the next field.