EnGenius Technologies ECB-1220R - Manual (Page 28)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
28
ƒ Read-Only Community Name: Specify the password for access the SNMP
community for read only access.
ƒ Read-Write Community Name: Specify the password for access to the SNMP
community with read/write access.
ƒ Send SNMP Trap: Select Enable if you would like to receive SNMP traps.
ƒ Send Trap To: Specify the IP address that would receive the SNMP traps.
ƒ Trap Community Name: Specify the password for the SNMP trap community.
ƒ Click on the Save Settings button once you have modified the settings.
WLAN Interface (Router mode)
DHCP Connection (Dynamic IP address) – Choose this connection type if your ISP
provides you the IP address. Most cable modems use this type of connection.
PPPoE (Point-to-Point Protocol over Ethernet) – Choose this option if your
internet connection requires a user name and password. Most DSL modems use this
type of connection.
Static IP address – Choose this option if you have a dedicated IP address.
DHCP Client
WAN interface can be configured as a DHCP Client in which the ISP provides the IP
address to the device. This is also known as Dynamic IP.
ƒ Select the DHCP and click on the Apply Changes button.
You have the option of cloning your PCs MAC address onto the device. Click on the
Clone Your PCs MAC Address to automatically copy the MAC address. You may
also specify a host name