Statistics – EnGenius Technologies ECB-1220R User Manual
Page 20
ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater
Version 1.1
20
System
o
Uptime: Duration of time since the device was last reset.
o
Firmware version: Version of the firmware that is currently loaded on the
device.
Wireless Configuration:
o
Mode: Wireless configuration mode such as Client Bridge, AP, or WDS.
o
Band: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).
o
SSID: The name used to identify the wireless network.
o
Channel Number: The channel used to communicate on the wireless
network.
o
Encryption: The type of security used on this network. It may be disabled,
WEP, WPA, etc.
o
BSSID: The MAC address of the SSID.
o
State: The current state of the bridge. It may be scanning or associated or
disabled.
o
Signal Strength: The signal strength of the wireless device.
o
Noise Level: The level of interference.
TCP/IP Configuration:
o
Attain IP Protocol: The IP address setting may be fixed or static.
o
IP Address: Displays the current IP address of the LAN port.
o
Subnet Mask: Displays the current subnet mask for the IP address.
o
Default Gateway: Displays the default gateway for the device.
o
DHCP: Displays the DHCP setting.
o
MAC Address: Displays the MAC address of the device.
Statistics
Click on the Statistics link under the Management menu. This page displays the
number of sent and received packets on the Ethernet and Wireless interface.