EnGenius Technologies ECB-1220R - Manual (Page 36)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
36
ƒ RTS Threshold: Packets over the specified size will use the RTS/CTS mechanism to
maintain performance in noisy networks and preventing hidden nodes from
degrading the performance.
ƒ Beacon Interval: Beacons will be sent out to devices at the specified intervals. This
value is measured in milliseconds (ms).
ƒ ACK Timeout: You may specify a value for the acknowledge timeout.
ƒ Data Rate: Select a data rate from the drop-down list. However, it is recommended
to select auto for the best performance.
ƒ Preamble Type: For best performance, all devices on the wireless network should
use the same preamble type. However, the wireless network will still function even
though the wrong preamble type is used.
ƒ Enable/Disable: A few options to enable some Wireless settings.
ƒ Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.
Security
ƒ Click on the Security link under the Wireless menu. On this page you can configure
the authentication and encryption settings such as WEP, WPA, and 80.1x.