EnGenius Technologies ECB-1220R - Manual (Page 26)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
26
ƒ Click on the Save button to save the current settings to a file on the local disk.
ƒ Click on the Browse button to select the settings file and then click on the Upload
button to load the previously saved settings.
ƒ Click on the Reset button to reset the device to its factory default settings. Click
Restart to reboot the device.
Password
ƒ Click on the Password link under the Management menu. This option allows you to
create a user name and password for the device. By default, this device is configured
without a user name and password. For security reasons it is highly recommended
that you create a user name and password.
ƒ Enter a user name into the first field.
ƒ Enter a password into the New Password field and then re-type the password into
the Confirmed Password field. Then click on the Apply Changes button.
ƒ By clicking on the Reset button, the user name and password fields will become
blank indicating that the username and password has been disabled.
TCP/IP Settings
ƒ Click on the TCP/IP Settings link on the
navigation drop-down menu. You will then see
the LAN Interface and SNMP option. The
options are described in detail below.