EnGenius Technologies ECB-1220R - Manual (Page 40)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
40
ƒ WPA Authentication Mode: Select the Personal (Pre-Shared Key) radio button.
ƒ WPA/WPA2: Select TKIP or AES as the cipher suite.
ƒ Pre-Shared Key Format: Select Passphrase from the drop-down list.
ƒ Pre-Shared Key: Enter the pass phrase here; this should be between 8 and 63
characters.
ƒ Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.
WPA / WPA2 RADIUS Authentication
ƒ Encryption: Select WPA or WPA2 from the drop-down list if your wireless network
uses this encryption. WPA (Wi-Fi Protected Access) was designed to improve upon
the security features of WEP (Wired Equivalent Privacy). The technology is designed
to work with existing Wi-Fi products that have been enabled with WEP. WPA
provides improved data encryption through the Temporal Integrity Protocol (TKIP),
which scrambles the keys using a hashing algorithm and by adding an integrity
checking feature which makes sure that keys haven’t been tampered with.
ƒ WPA Authentication Mode: Select the Enterprise (RADIUS) radio button.
ƒ WPA/WPA2: Select TKIP or AES as the cipher suite.
ƒ RADIUS Port: Enter the port number of the RADIUS server. The default is usually
1812.
ƒ RADIUS IP Address: Enter the IP address of the RADIUS server.
ƒ RADIUS Password: Enter the shared password of the RADIUS server.
ƒ Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.
Wireless Distribution System
• Wireless Distribution System uses wireless media to communicate with other APs, like
the Ethernet does. To do this, you must set these APs in the same channel and set MAC
address of other APs which you want to communicate with in the table and then enable
the WDS.