EnGenius Technologies ECB-1220R - Manual (Page 27)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
27
LAN Interface
ƒ Click on the LAN Interface link under the TCP/IP Settings menu. Using this option
you may change the IP address of the device as well as toggle the DHCP setting.
ƒ IP Address: Enter the IP address.
ƒ Subnet Mask: Enter the subnet mask for the IP address.
ƒ Default Gateway: Enter the IP address for the default gateway.
ƒ DHCP: If this device is a DHCP client and will receive its IP settings from a DHCP
server, then select Enabled from the drop-down list. Enabling the DHCP client will
disable the IP address, subnet mask, and default gateway fields. If the DHCP option
is disabled, then the IP address, subnet mask, and default gateway fields must be
filled in.
ƒ Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.
4.3.2 SNMP Settings
SNMP Daemon: Select Enable if you would like to use the SNMP feature.