Status – EnGenius Technologies ECB-1220R User Manual
Page 50
ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater
Version 1.1
50
Refer
to
Chapter 4 to learn how to configure this device in Bridge/Bridge Router
mode.
Status
Click on the Status link under the Management menu. The Status page is the first
page that is displayed once you have logged in. This includes details about the
system, wireless, and TCP/IP configuration.
System
o
Uptime: Duration of time since the device was last reset.
o
Firmware version: Version of the firmware that is currently loaded on the
device.
Wireless Configuration:
o
Mode: Wireless configuration mode such as client bridge, AP, or WDS.
o
Band: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).
o
SSID: The name used to identify the wireless network.
o
Channel Number: The channel used to communicate on the wireless
network.
o
Encryption: The type of security used on this network. It may be disabled,
WEP, WPA, etc.
o
BSSID: The MAC address of the SSID.
o
Associated Clients: Displays the number of clients currently associated to
the Access Point.
TCP/IP Configuration:
o
Attain IP Protocol: The IP address setting may be fixed or static.
o
IP Address: Displays the current IP address of the LAN port.
o
Subnet Mask: Displays the current subnet mask for the IP address.
o
Default Gateway: Displays the default gateway for the device.
o
DHCP: Displays the DHCP setting.
o
MAC Address: Displays the MAC address of the device.