EnGenius Technologies ECB-1220R - Manual (Page 52)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
52
ƒ Since the log is not dynamic, you must click on the Refresh button for the most
recent events, or click on the Clear button to clear the log.
Upgrade Firmware
ƒ Click on the Upgrade Firmware link under the Management menu. This page is
used to upgrade the firmware on the device. Make sure that downloaded the
appropriate firmware from your vendor.
ƒ Click on the Browse button and then select the appropriate firmware and then click
on the Upload button.
Note: The upgrade process may take about 1 minute to complete. Do not power off
the device during this process as it may crash the device and make it unusable. The
device will restart automatically once the upgrade is complete.
Save / Reload Settings, Reset to Default
ƒ Click on the Save / Reload Setting link under the Management menu. This option is
used to save the current settings of the device in a file on your local disk or load
settings on to the device from a local disk. This feature is very handy for
administrators who have several devices that need to be configured with the same
settings.
ƒ This page also allows you to reset the device to its factory default settings.