EnGenius Technologies ECB-1220R - Manual (Page 31)

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1
31
(Router mode)
Username / Password & Connection type (PPPoE) should be input then click on the
Connect button.
ƒ Address Mode: PPPoE can be used with a dynamic or static IP address. If you
select the Dynamic IP radio button, then the IIP address in the next field is not
required.
ƒ However, if you select the Static IP radio button, then the IP address in the next field
is required.
ƒ User Name: Specify the user name which is provided by your ISP.
ƒ Password: Specify the password which is provided by your ISP, and then verify it
once again in the next field.
PPTP (Point-to-Point Tunneling Protocol) (Router mode)
ƒ The WAN interface can be configured as PPTP. PPTP (Point to Point Tunneling
Protocol) uses a virtual private network to connect to your ISP. This method of
connection is primarily used in Europe. This method of connection requires you to