Epson STYLUS RX500 - Manual (Page 81)

Maintenance and Transporting 81
4. Press the A or l/r Select button repeatedly until 5.Head
alignment
appears on the LCD panel, and then press the x Color
button. The alignment patterns are printed.
5. Look at the alignment patterns. Find the pair of vertical lines that
is aligned in pattern #1, and then enter the number using the
numeric buttons. Finally, press the x Color button to enter your
selection.
6. The next pattern number appears. As with pattern #1, find and
register the aligned pairs for the remaining alignment patterns
#2 through #4.
After all patterns are set, the print head alignment operation is
completed.
Transporting This Product
If you need to transport this product, carefully repack it using the
original box (or a similar box that this product fits snugly into) and
packing materials as follows:
c
Caution:
❏ When storing or transporting this product, avoid tilting it,
placing it vertically or turning it upside down; otherwise ink
may leak from the cartridge.
❏ Leave the ink cartridges in their installed positions when
transporting this product; removing the cartridges for
transportation may damage this product.
1. Remove all paper from the sheet feeder and make sure that this
product is off.