Epson STYLUS RX500 - Manual (Page 61)

Scanning by using the LCD panel and buttons 61
3. Press the Scan Mode button to enter the Scan Mode.
4. Press the A or the l/r Select button repeatedly until 2.To PC
appears on the LCD panel, and then press the D or OK button.
The original document is scanned to your computer and EPSON
Smart Panel is launched. For details on the operating instructions
of EPSON Smart Panel, see its Help.
c Caution:
Never open the scanner unit while scanning or copying;
otherwise, you may damage this product.
Scanning Directly to Your e-mail
This product allows you to scan an image and then send an e-mail
with the scanned image attached. Before using this feature, make
sure you have installed EPSON Scan and EPSON Smart Panel on your
computer.
1. Connect this product to your computer, and then start up the
computer.
2. Place the material on the document table (see “Placing a
Document on the Document Table” on page 20 or “Using the
Film Holder” on page 62).
3. Press the Scan Mode button to enter the Scan Mode.
2.To PC
A
C
B
D
OK