Epson STYLUS RX500 - Manual (Page 77)

Maintenance and Transporting 77
Maintenance and Transporting
Checking the Print Head Nozzles
If you find that the printed image is unexpectedly faint or some dots
in the printed image are missing, checking the print head nozzles
helps you to identify the problem.
Follow the steps below to check the print head nozzles using the
control panel.
Note:
When the
! Error light is on and a message appears on the LCD panel to
prompt you to replace the ink cartridge or to indicate the ink is low, you
cannot clean the print head. In this case, replace the appropriate ink cartridge
first.
1. Make sure that A4 or Letter paper is loaded in the sheet feeder.
2. Make sure that this product is on, and the
! Error light is off.
3. Press the Setup Mode button to enter the Setup Mode.
4. Press the A or l/r Select button repeatedly until 2.Nozzle check
appears on the LCD panel then press the x Color button. This
product starts printing.