Epson STYLUS RX500 - Manual (Page 65)

Scanning by using the LCD panel and buttons 65
6. Close the document cover.
Note:
❏ Make sure the document cover is completely closed; otherwise you
cannot obtain proper colored images.
❏ A newton ring (ring-shaped stripes pattern) may appear in the scanned
image. To remove the newton ring, set the film with the base side facing
up. See the Reference Guide for detail.
❏ When you are not using the film holder, you can store it inside the
document cover. See “Storing the film holder” on page 67 for details.
35 mm film strips
1. Remove the film cover.
2. Slide the edge of the strip in the 35 mm film holder, base side
facing down. Place it so that all of the frame is positioned inside
the film holder, and then attach the film cover.
3. Close the film cover.