Fit to frame 13. hi speed, Fit to frame, Hi speed – Epson STYLUS RX500 User Manual
Page 56
56
Printing Directly from a Memory Card
12. Fit to frame
By turning this function on, you can print images fit the print size
you have selected. It automatically trims the areas of an image that
extend beyond the margins of the selected print size. Either the top
and bottom, or the left and right areas of photo is trimmed,
depending on the aspect ratio of the original photo and the selected
print size. The default setting is On.
Note:
If the photo’s vertical to horizontal ratio is higher than 1:2, it is treated as a
panoramic panoramatic photo; you cannot print it to fit the frame regardless
of the setting.
13. Hi speed
By turning this function on, you can perform bidirectional printing
(printing from right to left and from left to right). Turn this function
on or off according to your printing purpose. The default setting is
On.
Note:
If the print head is misaligned, vertical lines appear during bidirectional
printing. If this happens, you may need to align the print head (see
“Aligning the Print Head” on page 80).
Option
Description
On
Trims the image.
Off
Does not trim the image.
Option
Printing speed
Printing quality
On
Faster
Normal
Off
Slower
Fine