Epson STYLUS RX500 - Manual (Page 35)

Copying 35
Making copies lighter or darker
This product allows you to adjust the copying density in nine steps.
1. Press the Menu button to enter the Copy Menu.
2. Press the C button or l/r Select button repeatedly until 2.Copy
Density appears on the LCD panel.
3. Press the OK button. The LCD panel is shown below.
.
4. Adjust the copy density monitoring the LCD panel. Press the C
or the l Select button to make the copy lighter; press the D or the
r
Select button to make it darker.
5. When the adjustment is finished, press the OK button.
Reducing or enlarging copies manually
You can reduce or enlarge a copy by entering a value.
Note:
In the “2-up”, “4-up”, “Repeat”, or “Poster” layout, you cannot use this
feature.
1. Press the Menu button to enter the Copy Menu.
Copy Menu
A
C
B
D
l - oooo
o
nnnn + r