Workgroup mode and lan-to-lan example, Workgroup mode and lan-to-lan example -14 – Enterasys Networks 802.11 User Manual
Page 30
RoamAbout R2 Configuration Examples
1-14
Workgroup Mode and LAN-to-LAN Example
shows two RoamAbout R2s in different buildings using an outdoor directional
antenna to connect the LANs in those buildings. Each RoamAbout R2 contains two radio
slots; one slot configured in Workgroup mode, and one slot configured in LAN-to-LAN
Endpoint Bridge mode.
In addition, a RoamAbout R2 can be configured for multipoint mode (slot 1 only), connect
to an omni-directional antenna, and connect to other APs.
Figure 1-7: Workgroup and LAN-to-LAN Endpoint Configuration
Slot 2
Workgroup
Mode
Slot 1
Endpoint
Mode
R2
Slot 2
Endpoint
Mode
Slot 1
Workgroup
Mode
R2