Enterasys Networks 802.11 - Manual (Page 171)

7-25
Device Conflict on a Windows System
Changing the ISA Adapter Address
If the device conflict is related to the I/O port address of the ISA card, you can change the
ISA address by changing the jumper setting on the ISA card (
Figure 7-3 ). The ISA card
supports two I/O addresses:
•
3E0-3E1 (factory-set default)
•
3E2-3E3
To change the jumper setting, open your computer according to the documentation that was
shipped with your computer and follow the safety precautions described in the RoamAbout
installation documentation that came with the ISA adapter.
Figure 7-3: ISA Card I/O Address Strapping