Enterasys Networks 802.11 - Manual (Page 152)

Using the AP LEDs to Determine the Problem
7-6
Table 7-4: RoamAbout AP 2000 LED Patterns
Wired
LAN Wireless
LAN AP
Saturated Bridge
State Power/
System
Status Meaning of
LED Pattern
No power. Check the power
connections.
Diagnostics failed. The AP
automatically resets after
one minute. If the pattern
continues to display, contact
technical support.
Normal operating mode.
AP is waiting for the
Spanning Tree. No action is
required.
or
Spanning Tree detected a
bridge loop and
disconnected the port.
Remove the loop.
AP is occasionally saturated.
No action is required.
Cannot communicate with
the wireless network. Verify
that the PC Card is properly
inserted.
Cannot communicate with
the wired network. Verify
that the Ethernet cable is
properly connected.
Cannot communicate with
the wireless or wired
network.
= On, = Off, = Constant blinking, = Random blinking, = Any state
2 1