Casio Naurtech CETerm Ver.5.5 Scripting Guide - Manual (Page 74)

N AURTECH W EB B ROWSER AND T ERMINAL E MULATION FOR W INDOWS CE AND W INDOWS M OBILE
CETerm Scripting Guide Page 74
DCB
Property Description Values
DSROutputFlowControl Monitor DSR signal for output flow
control. true, false(D)
DTRControlMode DTR signal mode. Default is
“enable when open” (0x1). integer, see
Appendix 4
EventCharacter Character that triggers
EV_RXFLAG event. integer (D:0x0)
OutputContinueOnXOFF Continue output when XOFF has
been sent to restrict input.
true(D), false
ParityMode Parity scheme to use when parity
checking is enabled. Default is
“none” (0x0). integer, see
Appendix 4
RTSControlMode RTS signal mode. Default is
“enable when open” (0x1). integer, see
Appendix 4
StopBits Number of stop bits to use.
Default value is “one stop bit”
(D:0x0) integer, see
Appendix 4
XONCharacter Value of XON character. (D:0x11) integer
XONLowerLimit Consumed space threshold in
input buffer below which flow
control is relaxed to allow
additional input. Input flow control
may be XON/XOFF, RTS, or
DTR. integer (D:100)
XOFFCharacter Value of XOFF character.
(D:0x13) integer
XOFFInputFlowControl Enable XON/XOFF control for
reception. Send XOFFCharacter
when XOFFUpperCushion is
reached. Send XONCharacter
when XONLowerLimit is reached. true(D), false
XOFFOutputFlowControl Enable XON/XOFF control for
transmission. Stop transmission
when XOFFCharacter is received,
re-start when XONCharacter is
received.
true(D), false
XOFFUpperCushion Minimum available space in input
buffer allowed before flow control
is activated to stop additional
input. Input flow control may be
XON/XOFF, RTS, or DTR.
(D:0x0) integer (D:100)