Casio Naurtech CETerm Ver.5.5 Scripting Guide - Manual (Page 69)

N AURTECH W EB B ROWSER AND T ERMINAL E MULATION FOR W INDOWS CE AND W INDOWS M OBILE
CETerm Scripting Guide Page 69
Property Description Values
IBM emulation only. VT state can only be
locked or unlocked. (read only) see
Appendix 4
TextLineSeparator Text which separates every line in
GetText methods.
Default:
nothing
3.15 T HE S ERIAL P ORT O BJECT
The SerialPort object gives access to serial port functionality. The
SerialPort objects are obtained from a Device object method;
Device.SerialPort(i) where i is 0 through 9. This section documents
the methods and properties of the SerialPort object. The SerialPort object
has been used to integrate devices such as tethered scanners, Bluetooth
scanners, and RFID readers into CETerm. See Chapter 5 for additional details
about using the SerialPort object.
Methods
The following methods are available
Method Action
CancelWaitForEvent Stop listening for a serial port event.
ClearBreak
Clear the break condition.
ClearError Clear any error conditions and return status information.
Close Close the serial port and terminate communications.
Open Open the serial port for communication.
PurgeQueues Discard content of input and output queues.
Read Read up to a maximum number of bytes.
ReadByte Read one byte
ReadTillByte Read up to a maximum number of bytes, or a specified
byte value.
SetBreak Set the break condition.
SetQueueSizes Set the size of input and output queues.
WaitForEvent Start listening for a serial port event.
Write Write a string of characters.
WriteByte Write a single byte value
WriteNULL Write a number of NULL (0) bytes
WriteUrgent Write a single urgent byte at the front of the output queue.