Casio YA-S10 User Guide - Manual (Page 3)

3
Performing Control Box Operations
Control Box operations can be controlled using either its remote controller (YT-200) or the Control Box
keys. The Control Box remote controller lets you control your Projector System just as if it were a
single projector.
The Control Box has signal receivers on the front and back. Point the Control Box remote controller
signal emitter at one of the receivers when performing an operation.
Important!
To avoid running down the batteries, store the remote control unit so its buttons are not pressed
inadvertently.
Control Box Remote Controller
1 Remote controller signal emitter
2 [ALL], [1], [2], [3], [4] keys
Used for turning power on or off. For more information, see the
YA-S10 Setup Guide.
3 [INPUT], [AUTO], [S], [T], [W], [X], [ENTER], [MENU], [ESC],
[BLANK], [FREEZE], [ASPECT] keys
Used for various projection operations. These operations are
described in detail later in this manual.
4 [CORRECT], [POSITION], [AÙB], [IMAGE] keys
Used for shaping the projected image. For more information, see
the YA-S10 Setup Guide.
Control Box Keys and Indicators
1 POWER/STANDBY indicator
2 [ENTER] key
3 [MENU] key
4 [P] (Power) key
5 [INPUT] key
6 [AUTO] key
7 Cursor keys (q/w/U/I)
8 [ESC] key
1
2
3
4
8 7
1 2 3
4 5 6